Arredamenti per ufficio, Mobili per Ufficio, Sedie per ufficio, Mobili da ufficio, Sedia ufficio, pareti per ufficio.

The worktop, with thickness 30 mm, is made from MDF wood fibre panels covered with single-layer bent sheeting made of thermoformed PVC with thickness 400 my, it's available in following finishes:  CANALETTO WALNUT  20, WENGE' 45, TAKI MAPLE 58, MATRIX WHITE 84.

The supporting bracket is made of  bent plate metal with thickness 2.5 mm, with metallic silver epoxy coating secured to the slot of the extruded aluminium upright and to the tops by means of metric pitch screws.

The 30 mm thick shelf is made of MDF wood fibre panels covered with single-layer bent sheeting made of thermoformed PVC with thickness 400 my on the two sides.
The upper side is available in following finishes:  CANALETTO WALNUT  20, WENGE' 45, TAKI MAPLE 58, MATRIX WHITE 84.
The bottom side is always SILVER colour.
The shelf is also available in TEMPERED glass with satin-finish effect, thickness 12 mm, with polished flush-finished surrounding edges. The bottom side features glued stainless-steel supports secured to the upper brackets by means of metric-pitch screws.

The top support side panels, 25 mm thick, are made of melamine-faced particleboard in the same finishes of the back panels.

The back panel, with thickness 40 mm, is made from honeycombed panelboard consisting of a frame in 30 mm multiply, internal honeycomb filling with 30/30 meshes, outer lining in wood fibre panelboard type MDF, 4 mm thick, covered with single-layer bent sheeting made of thermoformed PVC with thickness 400 my. 2 brackets are fitted to the vertical sides for quick coupling to the aluminium uprights.
The back panel is available in following finishes: ALUMINIUM STRIPED EFFECT 00, CANALETTO WALNUT  20, WENGE' 45, TAKI MAPLE 58, MATRIX WHITE 84.

The vertical upright is made of silver anodised extruded aluminium sections with slot for fastening supporting elements from operator side and semi-circular section open-view side. On the bottom side it features an insert for levelling foot and on the top side an insert for fastening the retention plate for the 5 mm thick metallic silver shaped metal shelves. The vertical sides of the upright feature housings for quick-coupling of the backs.

mm 30

The VOLTA RECEPTION is also available in the H.72 cm version with joined module between them so as to create compositions with varying height. The modules H. 72 cm are available with back panel to the floor or with short back panel  that allows the use by disabled people. The technical characteristics and the finishes are the same of the high module.