Arredamenti per ufficio, Mobili per Ufficio, Sedie per ufficio, Mobili da ufficio, Sedia ufficio, pareti per ufficio.

Product Description Managerial executive, meeting rooms and visitor chairs, with swivel or fixed cantilever base, with or without arms. Three types of chairs are available: high, medium or low back, all are fully upholstered and covered.

Base materials and finishings 2 types of SWIVEL FIVE-STARS BASE: -Plastics: polyamide (nylon) frame, reinforced with fibreglass, antiscuff embossed black finishing. The base is equipped with wheel bushes for quick clutch of castors or glides. -Aluminium: pressure die casting aluminium frame, black or silver (RAL 9006) painted with epoxy powders electrostatically fixed or polished brushed. The base is equipped with wheel bushes for quick clutch of castors or glides. For visitor chairs also cantilever FIXED BASE, iron frame Fe37, cold rolled, formed by a curved tube, Ø28 mm., thickness 2 mm., and plate for fixing, thickness 3 mm. The structure is equipped with black polypropylene anti-reversal slides. Metal components are finished with galvanic treatment of chromium-plating or painted in black, silver (RAL 9006) with epoxy powders electrostatically fixed.

Structure material and finishings Metal frame painted with epoxy powders electrostatically fixed or chromed.

Stuffing material Seat and back in flexible polyurethane foam, cold moulded. SEAT and BACK CUSHION in expanded polyurethane, thickness 8 mm, density 21 kg./mc., together with acrylic resinate, weight 100 gr./m.

Body material Metal back shell. Multi-ply wood seat shell. For models Zante Legno back with multi-ply wood cover, heat-bent and assembled with low- formaldehyde glues, thickness 6 mm, formed by nr.4 poplar ply, thickness 15/10; seat with tubular iron Fe 37 frame, cold rolled, Ø 15 mm., thickness 1,5 mm., with reinforcing moulded iron plate Fe 37, cold rolled, thickness 3 mm, with ribs.

Cladding types Leather, synthetic leather, ecological leather or fabrics by choice from our pattern book in force. COMPOSITION Cat. A GUATEMALA: 87,5% PVC, 12,5% cotton. ALMA (rif. Madrid, rif. Venere): 100% polypropylene F.R. YORK: 100% acrylic. PATAGONIA: 100% polyolefin. Cat. B MERIDA: 77% cotton, 23% polyurethane. DOVER: 100% polyester. BELEM: 100% polyester F.R. Trevira CS. Cat. C ZARA – MANAUS - TREVI: 100% polyester F.R. Trevira CS. ANTISTATIC: 95,5% polyolefin, 0,5% carbon strand. Cat. D ELBA: 100% polyester F.R. Trevira CS. Cat. E NATURAL LEATHER: 100% cattle hide, chromo-tanned, aniline dyed, frosted and finished with polyurethane resins. Cat. F LEATHER EXTRA: 100% top quality cattle hide, chromo-tanned, aniline dyed, top quality natural grain, finished with resins in watery solution. ALCANTARA: 68% polyester, 32% polyurethane.

Technical characteristics Business chairs are equipped with back tilt mechanism with safety release system and body weight tensioner; on demand they can be equipped with seat depth adjustment facility.

Customizable Yes

Wheel types and characteristics Rotating and self-braking castors, Ø50, pin 11mm, frame in zama (zinc, aluminium, magnesium and copper alloy) refined with galvanic treatment of chromium plating or black painted with epoxy powders electrostatically fixed; equipped with fairing, which avoids the penetration of hair, threads, etc..; the quick clutch pin is in galvanized steel, and the rotating components have a dual tread. Chairs are equipped with rubber castors, suitable for hard surfaces; hard castors, recommended for surfaces like carpets – or glides, suitable for any kind of surface, are available on request.

Chair height regulator Yes

Regulating systems System formed by a pneumatic gas pump, activated by a lever located in the seat support plate. The piston is inserted in a steel column black painted with epoxy powders electrostatically fixed, outer covered with telescopic carters in plastics. The regulation column is equipped with conical extremes for fixing in the mechanism and in the base.

Seat dimension 470 mm

Back rest dimension High back: 710 mm / 645 mm Medium back: 565 mm / 515 mm

Armrests -Fixed polyurethane: closed anti-tangling, ring iron plate frame Fe37, rectangular section 20 mm. x 6 mm., cold rolled, and steel plate thickness 6 m.m., fully covered with black polyurethane with embossed surface finishing. -Adjustable H/W: “T-shaped” armrest, adjustable in height (course: 66 mm.) and width (course: 30 mm. per side) with rotating cap (opening angle: from +30° to –30°); tubular frame Ø 38 mm., thickness 1,2 mm., caps covered with black polypropylene with embossed surface finishing. The armrest is fixed through a steel plate thickness 3mm. Metal components are finished with galvanic treatment of chromium-plating or painted in black, silver (RAL 9006) with epoxy powders electrostatically fixed. -Fixed aluminium: closed anti-tangling armrests, pressure die casting aluminium frame, black painted with epoxy powders electrostatically fixed, or polished brushed. Black polyurethane caps have the same covering of seat and back. On demand aluminium frame can be refined with chromium-plating galvanic treatment. -Fixed ring plate: closed anti-tangling armrest, ring iron plate frame Fe37, cold rolled, rectangular section 50 mm. X 4 mm. and steel plate thickness 6 mm., caps covered with black polyurethane with embossed surface finishing. Metal components are finished with galvanic treatment of chromium-plating or painted in black, silver (RAL 9006) with epoxy powders electrostatically fixed.

Stackable No

Accessories Antistatic castors.Aluminium base with wood inserts. Covered armrest.

Parts substitution Yes, replacement available within 5 years since the product goes out of production.

Conformity to rule 626 Yes

Parts guarantee 5 years

Dimensions of shown product Variable dimensions according to the model chosen.

Product guarantee 5 years

Production guarantee 10 years

Place of production our plant in Bovisio Masciago (MI)

Certifyng board CATAS

Certificates Executive chairs meet the requirements set by the EN 1335 (type B with adjustable lumbar support) Visitor chairs meet the requirements set by the rules: EN 13761, EN 1022 e EN 1728. For the assembly of multi-ply materials, low-formaldehyde glues are used, complying with the EN 717-2/94.