Arredamenti per ufficio, Mobili per Ufficio, Sedie per ufficio, Mobili da ufficio, Sedia ufficio, pareti per ufficio.

Product Description Relo glazed partitions is unique for its possibility to be equipped, on one hand, thanks to back panels finishes. It is therefore possible to fit to opaque panels complimentary aluminum shelves, magnetic panels, acoustic and writable panels for noise’s absorption. Alternatively, you can dull the clear crystal films with blinds. Relo enhaces considerable transparency and particularly light, thus creating an overall minimal image with thin profiles, without bumps, so you will not collect dust. The modular partition system is characterized by structural bearing glasses composed of glass laminated monolithic sheets with polished beveled wires. May have different acoustic characteristics depending on the location planned and based on customer requirements. The modularity of partitions both in height and width can be determined from time to time depending on the different design requirements. To obtain a real noise reduction, the aluminum doors are fitted with double soft seals and bottom sash to close the gap between door and floor.

Structural characteristics The partition is made of 5 +5 mm laminated glass, placed on both sides of outer frame, matched each other with the interposition of a vertical profile, called separator, made of extruded aluminum and bonded with 0.5 mm adhesive on both sides. The single partition is made of laminated glass 6 +8 mm, placed on one side of the perimeter frame, matched each other with the interposition of a vertical profile, called separator, made of extruded aluminum and bonded with 0.5 mm adhesive on both sides. Around the outside, the two types of glazed panels are connected to the floor, ceiling and wall, the perimeter frame consisting of a set of profiles made of extruded aluminum, the overall section of 75x60mm, called the perimeter and inner and external covers. The edge profile, after being fitted at the bottom of a soft seal, is set lower, upper and lateral with Ø6mm anchors. Inside the perimeter frame at the bottom are placed some elements are, made of extruded aluminum having a length of 60mm, called regulators, on which is placed the glass, thus enabling, through a special screw M8 called pushing, glass leveling and adjustment up to 15mm drop. The glass panels are fixed to the perimeter profile applying top cover, with cylindrical seal in adhesion to glass, and outer covers combined with glass and fixed by a M8 grain.

Total wall depth in mm 75 mm

External finishing glass and polished and anodised aluminium.

Cabling possibility confirmed, through the insertion of cavedio for electrification

Standard module dimensions a part of door, there are no standard modules

Acoustic insulation 47 db for laminated glass with acoustic film 40 db for glass with normal 0.38 film

Customizable Yes

Product guarantee 2 years

Place of production Summaga di Portogruaro (VE)

Certifyng board CERT, IN.RIM

Certificates ETAG 003,UNI ISO 7892, ISO/DIN 7893.3, UNI EN 140.3, UNI EN 717.4, UNI EN ISO 140-1

Product environmental compatibility Yes

Reciclability % 100 %

References Regione Lombardia (L’altra Sede).

Realizations Altra Sede Regione Lombardia (Milano)