Arredamenti per ufficio, Mobili per Ufficio, Sedie per ufficio, Mobili da ufficio, Sedia ufficio, pareti per ufficio.

It’s logical but not obvious.To shape the workplace isn’t simple. And when the form must be also content,  the result is only Logic.

With Logic, the workplace has an extremely well-organized soul, a real customized settlement, where all the elements are intended to support and improve the daily performance.

Tops aren’t supported, but just hanged over vertical elements, metallic frames and containers, aimed to sustain and to contain. As well as the cabling, first requirement in a modern office, is an integrated component and not just an optional.

Logical and rational, because with Logic, pedestals, containers, filers are more than simple containers, becoming a support for the entire system, to get the best performances inside a reduced foot-print.

Contemporary over the shape and the colours, with many combination of finishing and silhouettes, Logic  it’s the logical choice to satisfy the modern operative environments, and maybe more.

PEDESTALS AND SERVICE UNITS
Pedestals and service units are made from an internal primary structure with 18mm thick decorated wood based panels in an ALUMINIUM colour and an external finishing part made from finishing side panels, bases, top and back panel.
The components of the external finishing part are made from an MDF wooden fibre panel covered with a thermoformed polymeric sheet available in  colours: CANALETTO WALNUT 20, WENGÉ 45, BRIL WHITE 69, MAPLE 91.
Pedestals and service units are fitted with pirouetting nylon wheels covered in rubber with a supporting pin and a chromed side finish, with a stabilizer brake for the front wheels.
Internal drawers: sides made from natural beech wood or 12mm thick wood fibres covered with black PVC, drawer bottoms made from MDF or 3 mm thick fibre, glides made from pressed steel with steel bearings or in metal with nylon bearings, with drawer opening stopper and self-closing system; loading capacity of the guides 30 kg.
All of the drawers are fitted with a lock and simultaneous closing system.
The handles with integrated lock are made from a pressed Zn+Al+Mg alloy in an aluminium/chromed silver finish.

BOISERIE PANEL SYSTEM
The system of wall mounted boiserie type panels can be used individually or together with the cabinets.
It allows for fixing of work tops, of suspended units with hinged doors, shelves and multipurpose accessories.
The coned steel structures are used to support the fixed work tops as well as for desks or, alternatively, 4-drawer pedestals or 2-filing drawer pedestals.
The system is made from horizontal panels with interposed aluminium profiles with an accessory unit, a structure for wall fixing made from vertical aluminium supports and side finishing profiles also made from aluminium.
The panels are made from an MDF wooden fibre panel covered with a thermoformed polymeric sheet available in the colours: CANALETTO WALNUT 20, WENGÉ 45, BRIL WHITE 69, MAPLE 91. All of the aluminium profiles have an opaque aluminium silver galvanic finish.

EXECUTIVE CABINETS
The cabinets are made up of the following elements:
Structural framework, adjustable base, finishing top, finishing side panels, doors.
They are available in widths of 45 and 90cm and in three heights: low units 83.5cm high, medium units 160cm high and tall units 200cm high.
The structural framework: it is made from 18mm thick decorated wood based panels and only available in GOLF SILVER 01.
The back panel is made from an 8mm thick particle board panel in colour GOLF SILVER 01
The base, the top, the finishing side panels and the doors are made from an MDF wooden fibre panel covered with a thermoformed polymeric sheet available in the colours: CANALETTO WALNUT 20, WENGÉ 45, BRIL WHITE 69, MAPLE 91.
The base is fitted with levelling feet and is available, as for the tops, in modules of 49, 94, 139, 184, 229 and 274 cm.
The doors are fitted with handles made from a pressed Zn+Al+Mg alloy in a mixed aluminium/chrome silver finish.
The cylinder lock (a string with two closing points for tall cabinets, with a sliding bar for medium and low cabinets) is integrated into the handle.
The glass doors are fitted with an aluminium frame painted silver with white satin glass and are available in two versions: with normal or toughened glass. All of the hinges have a wing and a steel box with 3 fields of regulation.

EXECUTIVE DESKS, EXTENSIONS, PC-SUPPORT AND MEETING TABLES
The work top is available in two constructive types:
A)- COVERED WITH A WOODEN EFFECT POLYMERIC SHEET (H.D.P.C.=High Density Polyvynil Chloride)
B)- IN TOUGHENED GLASS
Type A)
Total thickness of the work top 30mm, made from an MDF wooden fibre panel covered with a thermoformed polymeric sheet (H.D.P.C) available in the colours: CANALETTO WALNUT 20, WENGÉ 45, BRIL WHITE 69, MAPLE 91.
Type B)
Work top made from toughened glass with a satin effect, 15mm thick, with lipped shiny flat edges, available in the colours: ORANGE 95 , BLUE 98 and WHITE 99.

Supporting legs
Made from a 1,5 mm thick coned tube, available in a silver aluminium painted version and in a shiny chromed version.
Die-cast levelling feet made from a chromed steel alloy, with a regulation of 20mm.
Structural beams are made from rectangular steel tubes 50x25, 1,5 mm thick, which are fixed to the conical supporting legs by a joint in die-cast aluminium with a calliper opening that can be adjusted according to the configuration required.
 Modesty panel
Made from 18mm thick wooden fibre panels (MDF) covered on one side with a thermoformed polymeric sheet.  Available in the colour ALUMINIUM STRIPED EFFECT 00. They are suspended from the structural beams using supporting brackets.